Double Lock for Deso Oil Tanks (TA29)
This double lock protects 2 exposed outlets on the single skin Deso oil tank - the inspection hole and fill point. These could otherwise be utilised by thieves wanting to siphon out oil.
In addition, this Tank Arm comes with replacement tamper proof vent cover screws, to secure the vent cover - a third "at risk" part of the tank.
This lock fits most Deso oil tanks with screw top lids, for example, Deso H1235, H1900, H2500, LP1230, V1340, V2455, V3300 and V5000.
Please note, it does not fit the Deso R1220, nor any earlier Deso oil tanks with flap top lids. If in any doubt, please contact us, sending a photo of your oil tank if possible.
Materials: All Tank Arms are made from 5mm thick solid steel. The steel is zinc plated and assembled with a stainless steel tamper proof rivet, providing an anti-corrosion barrier so the arms will never rust or seize. The 2" aluminium cap is attached to the arm with a hardened steel pin, welded at both ends, to prevent removal.
Padlocks: We do not include a padlock, as some customers will have one already. However a padlock is required. We recommend the ABUS padlock.
This double lock protects 2 exposed outlets on the single skin Deso oil tank - the inspection hole and fill point. These could otherwise be utilised by thieves wanting to siphon out oil.
In addition, this Tank Arm comes with replacement tamper proof vent cover screws, to secure the vent cover - a third "at risk" part of the tank.
This lock fits most Deso oil tanks with screw top lids, for example, Deso H1235, H1900, H2500, LP1230, V1340, V2455, V3300 and V5000.
Please note, it does not fit the Deso R1220, nor any earlier Deso oil tanks with flap top lids. If in any doubt, please contact us, sending a photo of your oil tank if possible.
Materials: All Tank Arms are made from 5mm thick solid steel. The steel is zinc plated and assembled with a stainless steel tamper proof rivet, providing an anti-corrosion barrier so the arms will never rust or seize. The 2" aluminium cap is attached to the arm with a hardened steel pin, welded at both ends, to prevent removal.
Padlocks: We do not include a padlock, as some customers will have one already. However a padlock is required. We recommend the ABUS padlock.
This double lock protects 2 exposed outlets on the single skin Deso oil tank - the inspection hole and fill point. These could otherwise be utilised by thieves wanting to siphon out oil.
In addition, this Tank Arm comes with replacement tamper proof vent cover screws, to secure the vent cover - a third "at risk" part of the tank.
This lock fits most Deso oil tanks with screw top lids, for example, Deso H1235, H1900, H2500, LP1230, V1340, V2455, V3300 and V5000.
Please note, it does not fit the Deso R1220, nor any earlier Deso oil tanks with flap top lids. If in any doubt, please contact us, sending a photo of your oil tank if possible.
Materials: All Tank Arms are made from 5mm thick solid steel. The steel is zinc plated and assembled with a stainless steel tamper proof rivet, providing an anti-corrosion barrier so the arms will never rust or seize. The 2" aluminium cap is attached to the arm with a hardened steel pin, welded at both ends, to prevent removal.
Padlocks: We do not include a padlock, as some customers will have one already. However a padlock is required. We recommend the ABUS padlock.
