Single Lock for QSS Oil Tanks with Screw Top Lids (TA65)
A simple lock designed to fit over the inspection hole on your plastic oil tank. The base plate screws to the tank surface with tamper proof screws. An arm (attached to the base plate with stainless steel rivet) then covers the lid and is secured to the other side of the base plate with a padlock. The lid can then only be removed if padlock is removed.
Materials: All Tank Arms are made from 5mm thick solid steel. The steel is zinc plated and assembled with a stainless steel tamper proof rivet, providing an anti-corrosion barrier so the arms will never rust or seize. The 2" aluminium cap is attached to the arm with a hardened steel pin, welded at both ends, to prevent removal.
Padlocks: We do not include a padlock, as some customers will have one already. However a padlock is required. We recommend the ABUS padlock.
A simple lock designed to fit over the inspection hole on your plastic oil tank. The base plate screws to the tank surface with tamper proof screws. An arm (attached to the base plate with stainless steel rivet) then covers the lid and is secured to the other side of the base plate with a padlock. The lid can then only be removed if padlock is removed.
Materials: All Tank Arms are made from 5mm thick solid steel. The steel is zinc plated and assembled with a stainless steel tamper proof rivet, providing an anti-corrosion barrier so the arms will never rust or seize. The 2" aluminium cap is attached to the arm with a hardened steel pin, welded at both ends, to prevent removal.
Padlocks: We do not include a padlock, as some customers will have one already. However a padlock is required. We recommend the ABUS padlock.
A simple lock designed to fit over the inspection hole on your plastic oil tank. The base plate screws to the tank surface with tamper proof screws. An arm (attached to the base plate with stainless steel rivet) then covers the lid and is secured to the other side of the base plate with a padlock. The lid can then only be removed if padlock is removed.
Materials: All Tank Arms are made from 5mm thick solid steel. The steel is zinc plated and assembled with a stainless steel tamper proof rivet, providing an anti-corrosion barrier so the arms will never rust or seize. The 2" aluminium cap is attached to the arm with a hardened steel pin, welded at both ends, to prevent removal.
Padlocks: We do not include a padlock, as some customers will have one already. However a padlock is required. We recommend the ABUS padlock.